CT SOUNDS ALL MICRO SERIES AMPLIFIERS

M-400.4 MOTORCYCLE RZR 4-CHANNEL MICRO AMPLIFIER

CT Sounds introduces one nice 4-channel amplifier specially optimized for motorcycles, RZRs; the M-400.4 Motorcycle RZR 4-Channel Micro Amplifier. This is a nice bridgeable amplifier that is able to give you greater powers for high rated audio products pretty easily. This is one of the best audio amplifiers that can take up multi level impedance and supply distortion and harmonic-less outputs to all its channels all at once.

FEATURES:

1. It has bridgeable outputs
2. PWM (Pulse Width Modulated) power supply
3. Input & output RCA harness for connectivity
4. LED for amp status check
5. This is a Full range Class-D amplifier

AMPLIFIER RATINGS:

• 2Ω @ 12v Stereo, 170W (RMS), 340W (MAX) x 4 channels
• 4Ω @ 12v Stereo, 100W (RMS), 200W (MAX) x 4 channels
• 4Ω @ 12v Bridged, 340W (RMS), 680W (MAX) x 2 channels

TECHNICAL SPECIFICATIONS:

1. No of channel: 4
2. Bandwidth (-3dB): 10Hz – 20kHz
3. Gain adjustment: 220mV – 6V
4. Subsonic adjustment: N/A
5. Bass boost (@45Hz): 0dB ~ 18dB
6. Signal to noise ratio: -85dBA (@1W) & -100dBA (@FP)
7. Damping factor (50Hz @ 4Ω): >80
8. Minimum speaker impedance: 2Ω (ohms)
9. Low pass filter: 50Hz - 500Hz
10. High pass filter: 50Hz - 500Hz
11. Fuse rating: 60A
12. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• 105mm (W) x 40mm (H) x 249mm (L) or
• 4.13" (W) x 1.58" (H) x 9.80" (L)

M-300.2

CT Sounds represents the Micro series amplifier, the M-300.2. This is a mini sized digital amplifier that consumes lesser space while working for big. This is a 2 channel amplifier with bridgeable capabilities. The outstanding Class-D operation uses your battery power effectively rather than producing unnecessary heat.

FEATURES:

1. Status LEDs displays the on/off and faulty situations of the amplifier.
2. Input gain adjustment in between 220mV - 6V,
3. Inbuilt crossover selection switch- HPF, Full & LPF,
4. Inbuilt BTR (Bluetooth Receiver) port.

AMPLIFIER RATINGS:

• 2Ω @ 12v stereo, 250W (rms), 500W (max) x 2 channels
• 4Ω @ 12v stereo, 150W (rms), 300W (max) x 2 channels
• 4Ω @ 12v bridged, 500W(rms), 1000W (max) x 1 channel

TECHNICAL SPECIFICATIONS:

1. No of channels: 2
2. Frequency response (-3dB): 50Hz – 500Hz
3. Gain adjustment: 600mV – 6V
4. Subsonic adjustment: Yes
5. Bass boost: 0dB - +18dB
6. Signal to noise ratio (@ 1W): -85dB
7. Damping factor: >300
8. Minimum speaker impedance: 2Ω (ohm) stereo or 1Ω (ohm) bridged
9. Low pass filter: 50Hz - 500Hz
10. High pass filter: 50Hz - 500Hz
11. Fuse rating: 40A
12. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• Dimensions: 105mm (W) x 40mm (H) x 199mm (L)

M-350.1

CT Sounds represents the Micro series amplifier, the M-350.1. This is one of the best amplifier solutions for automobiles and motorcycles. This also is RZR compatible. This is a mini digital amplifier that consumes lesser space while working for big. This is a 1 channel Monoblock amplifier with no bridgeable capabilities. The outstanding Class-D operation uses your battery power effectively rather than producing unnecessary heat.

FEATURES:

1. Status LEDs displays the on/off and faulty situations of the amplifier.
2. Input gain adjustment in between 220mV - 6V,
3. Inbuilt crossover switch for LPF,
4. Inbuilt BTR (Bluetooth Receiver) port.

AMPLIFIER RATING:

• 2Ω @ 12v, 350W (rms), 700W (max) x 1 channel

TECHNICAL SPECIFICATIONS:

1. No of channels: 1
2. Frequency response (-3dB): 50Hz – 250Hz
3. Gain adjustment: 600mV – 6V
4. Subsonic adjustment: Yes (14Hz - 60Hz)
5. Bass boost: 0dB - +18dB
6. Signal to noise ratio (@ 1W): -85dB
7. Damping factor: >300
8. Minimum speaker impedance: 2Ω (ohm)
9. Low pass filter: 50Hz - 250Hz
10. Fuse rating: 30A
11. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• Dimensions: 105mm (W) x 40mm (H) x 189mm (L)