collections,amplifiers,Quality Speakers

Find Quality Products from 
https://www.ctsounds.com/collections/amplifiers


CT Sounds introduces premium quality car audio amplifiers that you've been craving for so long! Check out your best preferred amplifiers and make sure to have enough wattage to match with your subs and speakers!!!

AT-125.4D 4 CHANNEL CAR AMPLIFIER

CT Sounds brings you the AT-125.4d 4 Channel Car Amplifier. This is a 4 channel & a Class-D amplifier, which has qualified features for your car speakers.

When you car is small compared to the sound system you intend to put in, then your choices can surely meet with such a car power amplifier at quite feasible prices. More than that, it has high tech circuitry inside that gives you extra reliability and safety for the long run.

FEATURES:

1. MOSFET PWM (Pulse Width Modulated) power supply,
2. It has bridgeable outputs,
3. Soft turn on circuitry,
4. 1 ohm stable mono operation,
5. Thermal, DC offset, overload and speaker short protection inbuilt,
6. Nickel plated RCAs, thus low resistance inputs to the amp,
7. LED power and protection indicators,
8. This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic.

AMPLIFIER RATINGS:

• 2Ω @ 12.8v stereo, 190W (rms), 380W (max) x 4 channels
• 4Ω @ 12.8v stereo, 125W (rms), 250W (max) x 4 channels
• 4Ω @ 12.8v bridged, 400W (rms), 800W (max) x 2 channels

TECHNICAL SPECIFICATIONS:

1. Number of channels: 4
2. Frequency response (-3dB): 10Hz – 50kHz
3. Gain adjustment: 0.2v – 5v
4. Subsonic adjustment: N/A
5. Channel separation: 50dB
6. Bass boost: 0dB - +12dB
7. Signal to noise ratio: 100dB
8. Damping factor: 150
9. Minimum speaker impedance: 2Ω (ohm)
10. Low pass filter: 50Hz - 500Hz (500Hz – 5kHz)
11. High pass filter: 50Hz - 500Hz (500Hz – 5kHz)
12. No of fuses: 2 (40A each)
13. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• Dimensions: 192mm (W) x 56.7mm (H) x 280mm (L)

More product : 

http://www.ebay.com >>car audio 10 inch subwoofers >> car subwoofers with box and amp

car audio amplifier 4 channel >> 6.5 speakers component 

CT Sounds 1.0 Dual 12 Inch Car Subwoofers with Box and Amp, Ported Bass Package

1.0 Dual 12 Inch Car Subwoofers with Box and Amp

B-BOX-D-12-2.0

Regardless of the wattage/power amount you use in your vehicle, its the matter of how you use them to keep them safe and sound while functioning! Thinking of that, CT Sounds offers the B-Box-D-12-2.0 (Bio Subs - Boxed - Double Units - 12" - V2.0). It comes to you with (pre-wired) two subwoofers and an amplifier! This is one complete box package with two subwoofers and one amplifier; all you'll need to do is just place in your vehicle, tighten the box up and power it!

WHATS IN THE BOX:

• 2 x CT Sounds Bio 2.0 12" Car Subwoofer (D4)
• 1 x CT Sounds T-500.1D Monoblock Car Amplifier
• 1 x Remote bass knob

FEATURES:

The B-Box-D-12-2.0 sub box has been designed to fulfill bass solutions with car subwoofers & amplifier. the features of this box are-

• Color: Black
• Connectivity: @1Ω (Subs & Voice coils Paralleled)
• Box socket: 2 (Dual)
• Subwoofer no. & model: 2 x Bio 2.0 (D4)
• Subwoofer size: 12"
• Amplifier no. & model: 1 x T-500.1D [ 500W (rms) | 1000W (max) ]
• Ports: Ported enclosure

BOX DIMENSIONS:

Having the box in front and the subwoofers facing you; the box dimensions are-

• Length: 723mm (left to right; top and bottom)
• Breadth/depth: 290mm (front to back; top) & 360mm (front to back; bottom)
• Height: 365mm (top to bottom; front side)
• Subwoofers separation: 340mm (from the sub centers)
• Box wood thickness: 15mm (top, back and bottom)
• CT Sounds LOGO: 233mm (on the top portion of the box)

Please visit more eBay 

CT SOUNDS ALL MICRO SERIES AMPLIFIERS

M-400.4 MOTORCYCLE RZR 4-CHANNEL MICRO AMPLIFIER

CT Sounds introduces one nice 4-channel amplifier specially optimized for motorcycles, RZRs; the M-400.4 Motorcycle RZR 4-Channel Micro Amplifier. This is a nice bridgeable amplifier that is able to give you greater powers for high rated audio products pretty easily. This is one of the best audio amplifiers that can take up multi level impedance and supply distortion and harmonic-less outputs to all its channels all at once.

FEATURES:

1. It has bridgeable outputs
2. PWM (Pulse Width Modulated) power supply
3. Input & output RCA harness for connectivity
4. LED for amp status check
5. This is a Full range Class-D amplifier

AMPLIFIER RATINGS:

• 2Ω @ 12v Stereo, 170W (RMS), 340W (MAX) x 4 channels
• 4Ω @ 12v Stereo, 100W (RMS), 200W (MAX) x 4 channels
• 4Ω @ 12v Bridged, 340W (RMS), 680W (MAX) x 2 channels

TECHNICAL SPECIFICATIONS:

1. No of channel: 4
2. Bandwidth (-3dB): 10Hz – 20kHz
3. Gain adjustment: 220mV – 6V
4. Subsonic adjustment: N/A
5. Bass boost (@45Hz): 0dB ~ 18dB
6. Signal to noise ratio: -85dBA (@1W) & -100dBA (@FP)
7. Damping factor (50Hz @ 4Ω): >80
8. Minimum speaker impedance: 2Ω (ohms)
9. Low pass filter: 50Hz - 500Hz
10. High pass filter: 50Hz - 500Hz
11. Fuse rating: 60A
12. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• 105mm (W) x 40mm (H) x 249mm (L) or
• 4.13" (W) x 1.58" (H) x 9.80" (L)

M-300.2

CT Sounds represents the Micro series amplifier, the M-300.2. This is a mini sized digital amplifier that consumes lesser space while working for big. This is a 2 channel amplifier with bridgeable capabilities. The outstanding Class-D operation uses your battery power effectively rather than producing unnecessary heat.

FEATURES:

1. Status LEDs displays the on/off and faulty situations of the amplifier.
2. Input gain adjustment in between 220mV - 6V,
3. Inbuilt crossover selection switch- HPF, Full & LPF,
4. Inbuilt BTR (Bluetooth Receiver) port.

AMPLIFIER RATINGS:

• 2Ω @ 12v stereo, 250W (rms), 500W (max) x 2 channels
• 4Ω @ 12v stereo, 150W (rms), 300W (max) x 2 channels
• 4Ω @ 12v bridged, 500W(rms), 1000W (max) x 1 channel

TECHNICAL SPECIFICATIONS:

1. No of channels: 2
2. Frequency response (-3dB): 50Hz – 500Hz
3. Gain adjustment: 600mV – 6V
4. Subsonic adjustment: Yes
5. Bass boost: 0dB - +18dB
6. Signal to noise ratio (@ 1W): -85dB
7. Damping factor: >300
8. Minimum speaker impedance: 2Ω (ohm) stereo or 1Ω (ohm) bridged
9. Low pass filter: 50Hz - 500Hz
10. High pass filter: 50Hz - 500Hz
11. Fuse rating: 40A
12. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• Dimensions: 105mm (W) x 40mm (H) x 199mm (L)

M-350.1

CT Sounds represents the Micro series amplifier, the M-350.1. This is one of the best amplifier solutions for automobiles and motorcycles. This also is RZR compatible. This is a mini digital amplifier that consumes lesser space while working for big. This is a 1 channel Monoblock amplifier with no bridgeable capabilities. The outstanding Class-D operation uses your battery power effectively rather than producing unnecessary heat.

FEATURES:

1. Status LEDs displays the on/off and faulty situations of the amplifier.
2. Input gain adjustment in between 220mV - 6V,
3. Inbuilt crossover switch for LPF,
4. Inbuilt BTR (Bluetooth Receiver) port.

AMPLIFIER RATING:

• 2Ω @ 12v, 350W (rms), 700W (max) x 1 channel

TECHNICAL SPECIFICATIONS:

1. No of channels: 1
2. Frequency response (-3dB): 50Hz – 250Hz
3. Gain adjustment: 600mV – 6V
4. Subsonic adjustment: Yes (14Hz - 60Hz)
5. Bass boost: 0dB - +18dB
6. Signal to noise ratio (@ 1W): -85dB
7. Damping factor: >300
8. Minimum speaker impedance: 2Ω (ohm)
9. Low pass filter: 50Hz - 250Hz
10. Fuse rating: 30A
11. Operating voltage (-ve ground): DC 12v

DIMENSIONS:

• Dimensions: 105mm (W) x 40mm (H) x 189mm (L)

TEAM 7000.1 CLASS D 7000W RMS COMPETITION AMPLIFIER

CT Sounds introduces its highest competition level car power amplifier, the TEAM 7000.1 Class D 7000W RMS Competition Amplifier. 

This is a humongous competition level amplifier that is a Class D operational Monoblock 1 channel amplifier. This power amplifier gives you massive 7 kilo watts at 1 ohm stable which can go for many subwoofers and speakers all at once! Check out further features, amplifier ratings & technical specifications below-

FEATURES:

1. MOSFET PWM (Pulse Width Modulated) power supply,
2. Soft turn on circuitry,
3. 1 ohm stable mono operation,
4. Variable input gain control, subsonic filter & low pass crossover,
5. Variable phase shift (0o - 180o) & bass boost,
6. Thermal, DC offset, overload and speaker short protection inbuilt,
7. Nickel plated RCAs, thus low resistance inputs to the amp,
8. LED power and protection indicators,
9. It comes with Remote Bass Knob; therefore allowing you to control power, on/off or subwoofer bass level easily,
10. This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic.

AMPLIFIER RATINGS:

• 1Ω @ 14.4v, 7375W (RMS), 14750W (MAX)
• 2Ω @ 14.4v, 4032W (RMS), 8064W (MAX)
• 4Ω @ 14.4v, 2028W (RMS), 4056W (MAX)

TECHNICAL SPECIFICATIONS:

1. No of channel: 1
2. Frequency response: 10Hz – 250Hz
3. Gain adjustment: 0.2v – 5v
4. Subsonic adjustment: 10Hz – 50Hz
5. Bass boost: 0dB ~ +9dB
6. Signal to noise ratio: 100dB
7. Damping factor: 180
8. Minimum impedance: 1Ω (ohm)
9. Low Pass filter: 35Hz - 250Hz
10. External fuse rating: 700A
11. Bass level remote control (16.4ft): Yes
12. Operating voltage (-ve ground): DC 12v
13. Wire inputs: Dual 0GA
14. Bass knob: Remote gain control, clip light indicator, built in voltmeter & push-able on/off switch

DIMENSIONS:

• Dimensions: 258mm (W) x 67mm (H) x 790mm (L)

Go to for Buy: www.ctsounds.com

STRATO 6.5 INCH COMPONENT SPEAKERS SET

CT Sound's new Strato 6.5 Inch Component Speaker Set. 

This is a complete full range speaker set that includes a pair of speakers, a pair of tweeters and a pair of crossover boxes. Its like a complete set one would need in his/her vehicle. This set covers quality audio within your vehicle and covers a lot of mid-bass as well. 

WHATS IN THE BOX:

• 2 x Strato 6.5" component speakers
• 2 x 19mm Silk dome tweeters
• 2 x ABS boxed crossovers

FEATURES:

1. Each speaker has EISV wire wound voice coil, IMPP (Injection Molded Plastic Polypropylene) cone, NBR (Nitrile Butadiene Rubber) surround, spring terminals & PC+NOMEX spider with 4mm top plate & 4mm back plate
2. Voice coil of 1” (diameter) at each speaker
3. Each speaker has Y30 graded ferrite magnet
4. Each 19mm silk-dome tweeter is covered with silver chrome plated face grille with metal mesh and is attached with Copper Clad Aluminium Wire pair (CCAW)
5. Each crossover circuit box has dark clear top cover with the CT Sounds logo printed on top of it
   
6. Each speaker has black stamp steel basket
7. Black powder texture paint on the speakers

TECHNICAL SPECIFICATIONS:

1. Speaker size: 6.5”
2. Speaker type: Component
3. System total power: 150W (rms), 300W (max)

For Woofer:

1. Rated power per speaker: 75W (rms), 150W (max)
2. Rated power per speaker pair: 150W (rms), 300W (max)
3. Rated impedance: 4Ω (Ohms)
4. Sweep voltage: 10V
5. Output SPL (@ 1w/1m): 88dB
6. Resonant frequency: 65Hz
7. Frequency response (@ SPL -10dB): 50Hz – 20kHz
8. Magnet size: 90mm X 15mm
9. Magnet type: Y30 ferrite

For Tweeter:

1. Rated Impedance: 4Ω (Ohms)
2. Sweep voltage: 1.8V
3. Output SPL (@ 1w/1m): 90dB
4. Frequency response(@ SPL -10dB): 900Hz – 20kHz
5. Tweeter size (diameter): 19mm
6. Tweeter type: Silk-dome with metal mesh & face grille
7. Magnet type: Neo

For Crossover:

1. Crossover circuit: 4μF capacitor/100V
2. Crossover point: 3.5kHz
3. Filter for woofer: 6dB
4. Filter for tweeter: 12dB

MOUNTING/INSTALLATION PARAMETERS:

1. Cutout diameter: 142mm / 5.60” 
2. Outer diameter: 176mm / 6.90"
3. Mounting depth: 65mm / 2.55”

For More product click  www.ctsounds.com

BIO 6.5 INCH COAX CAR SPEAKERS (PAIR)

CT Sounds Bio 6.5 Speakers Inch Cars Speaker Silk Dome Coax Coaxial Car 2 Way

Check out CT Sounds speaker package- Bio 6.5 Inch Coax Car Speakers (Pair). This splendid package includes 2 pieces of Bio 6.5" speakers where each comes with black stamp steel basket, to let you go for high treble (frequency) sounds without any audio fractures. The plastic polypropylene (PP) cone along with NBR (Nitrile Butadiene Rubber) surround lets you have the satisfaction that most of the customers’ desire.

The Bio 6.5” speakers are coaxial speakers where the tweeter and the woofer are placed at the same location; from where- the complete audio output comes out. This coaxial speaker is qualified enough to handle the low frequencies through the woofer and the high frequencies through the center mount tweeter.

WHATS IN THE BOX:

·         2 x Bio 6.5" Coaxial speakers

FEATURES:

1.     Each speaker has PP cone, NBR (Nitrile Butadiene Rubber) surround & PC spider with 3mm front plate (White zinc coated)

2.     Voice coil of 0.8” (diameter) at each speaker

3.     Each speaker has Y30 graded ferrite magnet

4.     Each speaker has a 13mm silk-dome tweeter which is attached with Copper Clad Aluminum Wire pair (CCAW)

5.     Each speaker has black stamp steel basket

6.     Black powder paint on the speakers

TECHNICAL SPECIFICATIONS:

1.     Speaker size: 6.5”

2.     Speaker type: Coaxial

3.     System total power: 60W (rms), 120W (max)

For Woofer:

1.     Rated power per speaker: 30W (rms), 60W (max)

2.     Rated power per speaker pair: 60W (rms), 120W (max)

3.     Voice coil: 0.8" (diameter)

4.     Rated impedance: 4Ω (Ohms)

5.     Sweep voltage: 11V

6.     Output SPL (@ 1w/1m): 89dB

7.     Resonant frequency: 102Hz

8.     Frequency response (@ SPL -10dB): 50Hz – 20kHz

9.     Magnet weight: 21oz

10.   Magnet type: Y30 ferrite

For Tweeter:

1.     Rated Impedance: 4Ω (Ohms)

2.     Sweep voltage: 1.8V

3.     Tweeter size (diameter): 13mm

4.     Tweeter type: Silk-dome

5.     Magnet type: N38H

For Crossover:

1.     Crossover circuit: 3.3μF capacitor/50V

MOUNTING/INSTALLATION PARAMETERS:

1.     Cutout diameter: 144mm / 5.65”

2.     Outer diameter: N/A

3.     Mounting depth: 56mm / 2.2”

 Don't forget to shop for CT Sounds products at visit here:

www.ctsounds.com

www.ebay.com

www.amazon.com