Tuesday, June 6, 2017

BIO 6.5 INCH COAX CAR SPEAKERS (PAIR)


CT Sounds Bio 6.5 Speakers Inch Cars Speaker Silk Dome Coax Coaxial Car 2 Way


Check out CT Sounds speaker package- Bio 6.5 Inch Coax Car Speakers (Pair). This splendid package includes 2 pieces of Bio 6.5" speakers where each comes with black stamp steel basket, to let you go for high treble (frequency) sounds without any audio fractures. The plastic polypropylene (PP) cone along with NBR (Nitrile Butadiene Rubber) surround lets you have the satisfaction that most of the customers’ desire.

The Bio 6.5” speakers are coaxial speakers where the tweeter and the woofer are placed at the same location; from where- the complete audio output comes out. This coaxial speaker is qualified enough to handle the low frequencies through the woofer and the high frequencies through the center mount tweeter.
WHATS IN THE BOX:
·         2 x Bio 6.5" Coaxial speakers

FEATURES:
1.     Each speaker has PP cone, NBR (Nitrile Butadiene Rubber) surround & PC spider with 3mm front plate (White zinc coated)
2.     Voice coil of 0.8” (diameter) at each speaker
3.     Each speaker has Y30 graded ferrite magnet
4.     Each speaker has a 13mm silk-dome tweeter which is attached with Copper Clad Aluminum Wire pair (CCAW)
5.     Each speaker has black stamp steel basket
6.     Black powder paint on the speakers
TECHNICAL SPECIFICATIONS:
1.     Speaker size: 6.5”
2.     Speaker type: Coaxial
3.     System total power: 60W (rms), 120W (max)


For Woofer:
1.     Rated power per speaker: 30W (rms), 60W (max)
2.     Rated power per speaker pair: 60W (rms), 120W (max)
3.     Voice coil: 0.8" (diameter)
4.     Rated impedance: 4Ω (Ohms)
5.     Sweep voltage: 11V
6.     Output SPL (@ 1w/1m): 89dB
7.     Resonant frequency: 102Hz
8.     Frequency response (@ SPL -10dB): 50Hz – 20kHz
9.     Magnet weight: 21oz
10.   Magnet type: Y30 ferrite
For Tweeter:
1.     Rated Impedance: 4Ω (Ohms)
2.     Sweep voltage: 1.8V
3.     Tweeter size (diameter): 13mm
4.     Tweeter type: Silk-dome
5.     Magnet type: N38H
For Crossover:
1.     Crossover circuit: 3.3μF capacitor/50V
MOUNTING/INSTALLATION PARAMETERS:
1.     Cutout diameter: 144mm / 5.65”
2.     Outer diameter: N/A
3.     Mounting depth: 56mm / 2.2”

 Don't forget to shop for CT Sounds products at visit here:


No comments:

Post a Comment

collections,amplifiers,Quality Speakers

Find Quality Products from  https://www.ctsounds.com/collections/amplifiers CT Sounds  introduces premium quality car audio amplifiers ...