Find Quality Products from
https://www.ctsounds.com/collections/amplifiers
CT Sounds introduces premium quality car audio amplifiers that you've been craving for so long! Check out your best preferred amplifiers and make sure to have enough wattage to match with your subs and speakers!!!
https://www.ctsounds.com/collections/amplifiers
CT Sounds introduces premium quality car audio amplifiers that you've been craving for so long! Check out your best preferred amplifiers and make sure to have enough wattage to match with your subs and speakers!!!
AT-125.4D 4 CHANNEL CAR AMPLIFIER
CT Sounds brings you the AT-125.4d 4 Channel Car Amplifier. This is a 4 channel & a Class-D amplifier, which has qualified features for your car speakers.
When you car is small compared to the sound system you intend to put in, then your choices can surely meet with such a car power amplifier at quite feasible prices. More than that, it has high tech circuitry inside that gives you extra reliability and safety for the long run.
FEATURES:
- MOSFET PWM (Pulse Width Modulated) power supply,
- It has bridgeable outputs,
- Soft turn on circuitry,
- 1 ohm stable mono operation,
- Thermal, DC offset, overload and speaker short protection inbuilt,
- Nickel plated RCAs, thus low resistance inputs to the amp,
- LED power and protection indicators,
- This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic.
AMPLIFIER RATINGS:
- 2Ω @ 12.8v stereo, 190W (rms), 380W (max) x 4 channels
- 4Ω @ 12.8v stereo, 125W (rms), 250W (max) x 4 channels
- 4Ω @ 12.8v bridged, 400W (rms), 800W (max) x 2 channels
TECHNICAL SPECIFICATIONS:
- Number of channels: 4
- Frequency response (-3dB): 10Hz – 50kHz
- Gain adjustment: 0.2v – 5v
- Subsonic adjustment: N/A
- Channel separation: 50dB
- Bass boost: 0dB - +12dB
- Signal to noise ratio: 100dB
- Damping factor: 150
- Minimum speaker impedance: 2Ω (ohm)
- Low pass filter: 50Hz - 500Hz (500Hz – 5kHz)
- High pass filter: 50Hz - 500Hz (500Hz – 5kHz)
- No of fuses: 2 (40A each)
- Operating voltage (-ve ground): DC 12v
DIMENSIONS:
- Dimensions: 192mm (W) x 56.7mm (H) x 280mm (L)
More product :



Nice posting .
ReplyDelete